Amptweaker DeFizzerator (EQ Passif)
50.-
13.05.2026
1005, Lausanne
Amptweaker DeFizzerator égaliseur passif hautes fréquences.
Amptweaker DeFizzerator Passive EQ Guitar Effects Pedal
Since some amps and/or speakers tend to emphasize extremely high frequencies, the DeFizzerator can be used to roll off sizzly highs in the loops of Amptweaker pedals, inline with any pedals or buffers, in the effects loop of an amplifier, or even in a pedal switcher. One particularly good use is to help an amp sound like it's cranked when using it at 'bedroom' volumes. The DeFizzerator is a simple low-impedance passive EQ with 3 frequencies Fizz, Buzz, and Crackle are generally higher than a typical Tone or High EQ, so it's useful for really fine tuning the fizz.
When using the DeFizzerator in an Amptweaker pedal loop, you will normally get better results by setting that loop to Post. This can also be used to add a high rolloff to the Boost loops of the Pro pedals, since sometimes cranking the gain up can give a bit more edge to the tone.....normally that helps cut through, but if you want a more balanced tone, the DeFizzerator is a simple way to tweak your pedal yourself.
The pedal is a low impedance design, so it doesn't add any noise, but of course cables shouldn't be long and wrapped near transformers or power supply lumps to avoid adding any ground loops. This is especially important if using it with an amp, since you shouldn't place it above the power transformer end of the amp(usually near the power switch and line cord).
Since the DeFizzerator is passive, you simply patch it in and turn it down.....also try setting it dramatically and then turn the pedal or amp's tone up more for different highend.
Lower settings of the lower frequencies, Buzz and Crackle, might start to reduce the volume some, mostly due to the lack of highs, so you might have to make that up by turning up your pedal or amp's volume a bit.....but this is a simple solution that requires no batteries, and you can just keep one in your gig bag to fix a scratchy backline!
Features
1 Band passive EQ
3 position frequency switch - Fizz, Buzz, Crackle
Current: uses no power or batteries
Amptweaker DeFizzerator Passive EQ Guitar Effects Pedal
Since some amps and/or speakers tend to emphasize extremely high frequencies, the DeFizzerator can be used to roll off sizzly highs in the loops of Amptweaker pedals, inline with any pedals or buffers, in the effects loop of an amplifier, or even in a pedal switcher. One particularly good use is to help an amp sound like it's cranked when using it at 'bedroom' volumes. The DeFizzerator is a simple low-impedance passive EQ with 3 frequencies Fizz, Buzz, and Crackle are generally higher than a typical Tone or High EQ, so it's useful for really fine tuning the fizz.
When using the DeFizzerator in an Amptweaker pedal loop, you will normally get better results by setting that loop to Post. This can also be used to add a high rolloff to the Boost loops of the Pro pedals, since sometimes cranking the gain up can give a bit more edge to the tone.....normally that helps cut through, but if you want a more balanced tone, the DeFizzerator is a simple way to tweak your pedal yourself.
The pedal is a low impedance design, so it doesn't add any noise, but of course cables shouldn't be long and wrapped near transformers or power supply lumps to avoid adding any ground loops. This is especially important if using it with an amp, since you shouldn't place it above the power transformer end of the amp(usually near the power switch and line cord).
Since the DeFizzerator is passive, you simply patch it in and turn it down.....also try setting it dramatically and then turn the pedal or amp's tone up more for different highend.
Lower settings of the lower frequencies, Buzz and Crackle, might start to reduce the volume some, mostly due to the lack of highs, so you might have to make that up by turning up your pedal or amp's volume a bit.....but this is a simple solution that requires no batteries, and you can just keep one in your gig bag to fix a scratchy backline!
Features
1 Band passive EQ
3 position frequency switch - Fizz, Buzz, Crackle
Current: uses no power or batteries
- Prix CHF
- 50.-
- NPA
- 1005
Annonces similaires
Source Audio Aftershock Bass Distortion Pedal
150.-
Compressor - Electric Guitar Effect Pedal / True Bypass
19.-
Pédale effet guitare : Moollon Signal Boost
150.-
MXR M108 Ten Band EQ + alim.
109.-
Palmer PDI06L08 Attenuator for guitar amplifier tube lampe
160.-
Xotic Sound XW-1 Wah Pedal - Neu!
155.-
Super rare black edition ZOAR EarthQuaker Devices
140.-
SP Compressor Xotic effects
100.-
Magnetic Effects Sandare
100.-
Pédale pour guitare - Celmo Sardine Can Compressor
100.-
Rainger FX - Minibar Fuzz handsigniert von David Rainger
150.-
Thorpy FX Pulse Doppler (vib/phase)
190.-
MXR MC401 Boost/Line Driver
89.-
Boss MZ-2 Digital Metalizer
120.-
Pédale de fuzz Moollon Z.O.D.
150.-
Informations légales
Français
© SMG Swiss Marketplace Group AG 2026.
La duplication et l'appropriation des annonces par des tiers, en particulier des photos et des données personnelles qu'elles contiennent, portent atteinte aux droits associés et sont strictement interdites.