Alle Inserate von Patrick
Auf anibis.ch seit 23.05.2011
4 Inserate
Sortieren nach
Neueste
Carrouge VD, 1084, Gestern 08:20
Basse Schecter 5 cordes Hellraiser Extreme 5 Diamond (2025)
LIKE NEW ! Comme neuve car très très peu jouée !
Tuners Grover
Fretboard Material Ebony
Neck Material Maple/Walnut Multi-ply
Inlays MOP Gothic Crosses
Scale 35" (889mm)
Neck Shape Thin "C"
Thickness @ 1st Fret- .787" (20mm)/ @ 12th Fret- .866" (22mm)
Frets 24 X-Jumbo
Fretboard Radius 16" (406mm)
Nut Graph Tech XL Black Tusq
Nut Width 1.771" (45mm)
Truss Rod 2-Way Adjustable Rod w/ 5/32" (4mm) Allen Nut
BODY
Guitar Colors Black and Grey
Hardware Color Black Chrome
Top Contour Arched Top
Dexterity Right Handed
Construction Neck-Thru w/Ultra Access
Body Material Mahogany
Top Material Quilted Maple
Binding MOP w/ BLK/WHT/BLK Multi-ply
Bridge Schecter Custom Bass String Thru (or Top Load)
ELECTRONICS
Controls Volume (Push-Pull)/Volume (Push-Pull)/ Active EMG 3-Band EQ
Bridge Pickup EMG X (upgraded)
Neck Pickup EMG X (upgraded)
Battery Compartment 18-volt w/Screw Plate
1 100.-
Carrouge VD, 1084, 14.07.2026
Basse Ken Smith Black Tiger ELITE 5 cordes (2015)
Basse comme neuve car très très peu utilisée !
The Ken Smith Black Tiger Elite is a premium, handcrafted boutique electric bass renowned for its striking exhibition-grade woods and signature hi-fi tone. It features a 5-piece body (exhibition walnut top/back, tiger maple core, and mahogany laminates) and a 5-piece aged maple/shedua neck. It is the flagship of the Tiger Elite Series - Ken Smith Basses.Core Features and SpecificationsBody & Top: Features a highly figured 5A exhibition-grade Crotch Walnut top and back. The core is typically Tiger Maple sandwiched with thin mahogany laminates for structural integrity and resonance.Neck: 5-piece laminated aged Hardrock Maple & Shedua (or Bubinga on older models), reinforced with graphite inlaid bars and a custom Smith dual-truss rod.Fretboard: Quartersawn Macassar Ebony with Mother-of-Pearl dot inlays and 24 frets.Electronics: Proprietary Ken Smith pickups and the updated Smith B.M.T. 3-band 18-volt EQ circuit. It includes internal 4-way DIP switches for adjusting specific frequency bands, plus a push/pull active/passive master volume.Hardware: Custom gold hardware, including a Smith QSR (Quick String Release) solid brass bridge and Gotoh/Ken Smith tuners.Finish: A thin Elite gloss lacquer (or lower-sheen catalyzed Italian varnish) designed to protect the wood while allowing for maximum natural resonance.
6 900.-
Carrouge VD, 1084, 14.07.2026
MTD Michael Tobias Design 5 strings (2005 - Rare)
Très rare car manche entièrement en ébène.
Excellent état - comme neuve !
The MTD Standard Finish is a catalyzed acrylic urethane satin that looks and feels a lot like oil but is many times harder without building great thickness. This allows the bass to breathe, sounding more wooden.
Other finishes are available upon request.
MTD Handmade American bodies and necks are ergonomically carved to allow comfortable access to the extended scale bass. In general, ash (medium weight) has more growl and is more aggressive, poplar bodies have more punch, makore has similar properties to mahogany, however it has more sparkle and presence.
Alder makes a very warm, big sounding, punchy bass, slightly compressed. Adding a top helps to focus the low end. A hard top tends to create a quicker response with more bite and definition while a soft top will tend to round out the voice.
A wenge neck and board add compression and focus to the speaking voice of the bass. A maple neck and rosewood board is more open and slightly warmer than a maple neck and maple board. Ebony on maple is very quick in its response with lots of snap.
We have been using ash as a neck material and found it to be very similar to wenge in its focus but more open. We think it works best with a maple board.
ELECTRONICS
The pickups and active electronics are a proprietary design for MTD made by Bartolini Inc. which consist of a master volume and pan pot, treble, mid, bass cut and boost, with center click (from neck to bridge).
The three position switch selects the mid range cut and boost point. Down is lower mids, center is middle and up is upper mids. When the mid pot is at center click, the switch has minimal effect.
The EQ has 2 batteries and our new proprietary Bartolini/MTD preamp is +18 volts. It will debut at NAMM 2020, replacing the previous +/- 9 version while keeping the same voicing.
EQUALIZATION
MTD Basses can be made to sound very "traditional" by cutting the mids all the way at 1000 (switch in top position), and boosting the bass and treble to 10 with the blend pot at center. This offers a great slap tone.
Boosting the mids at 250 ( switch in lower position), with bass at 10 and treble at 9-10 with the blend pot on the bridge pick up gives the early Bartolini TCT tone. This offers a very percussive finger tone.
*These are just suggestions. The tone will vary depending on the rig and technique used.
HARDWARE
Bridges and tuners are custom manufactured for MTD American Basses by Hipshot. All MTD Handmade Basses use the revolutionary Buzz Feiten Tuning System which enhances tuning dramatically, allowing the player greater freedom of expression.
3 900.-
Carrouge VD, 1084, 14.07.2026
Basse FRETLESS 5 Lightwave Saber Bass
Comme neuve car JAMAIS jouée !
LightWave Optical Pickup System
At the core of your Saber Bass is the LightWave Optical Pickup
System, a revolutionary new pickup system that uses infrared
light technology to faithfully reproduce the true sound of the string.
Unlike conventional pickups that interact with string vibration, the
LightWave Pickup System sees the vibration of the string without
affecting the string motion in any way. As a result, the natural
sound of the string is transmitted in the most transparent and
linear fashion possible. What you hear is an absolutely faithful
reproduction of the string vibration.
The Voice of the String
What you will hear is extraordinary: the sound of the strings, the
sound of the instrument, and most importantly, the sound of your
playing. You will notice a whole new sensitivity in the interaction
between your fingers, the strings and the instrument that will create
a new palette of subtle nuances and unique tonalities.
Playing multi-string chords, close intervals, complex voicings, and
harmonics on your Saber Bass will be a revelation. You will hear
an openness, transparency and dimensionality unlike anything you
have previously experienced.
Long, Natural Sustain
Since the LightWave Optical Pickup System does not interact with
the string, and because it is capable of much greater sensitivity, the
strings will sustain much longer. In fact, the strings will sustain for
the full duration of their vibration, fading in a pure, linear fashion into
silence, without an abrupt ending or distorted artifacts. The decay
rate is totally natural, like the pedal sustain of a Grand Piano.
Extremely Low Noise
Unlike magnetic pickups, which induce extraneous noise to the
sound, the LightWave Optical Pickup has virtually no self-noise. As
a result, you can play at any volume without annoying background
hum or buzz. This is an absolute breakthrough for modern
recording: noise-free, extraordinarily transparent sound. Even with
your amp at high volume, you will experience amazing dynamic
range and sensitivity.
1 290.-